Mr. Bipin G Vyas

Dr. Bipin G Vyas

Sr. Scientist

Academic Qualifications

Ph.D. Engineering Science (AcSIR), Master of Energy Engineering, Gujarat Technological University, Gujarat

Contact Details

Dr. Bipin G Vyas

Sr. Scientist

bgvyas@csmcri.res.in

7450 / 2567760

  1. RV Patel, R Gajera, BG Vyas, P Labhasetwar, A Yadav, “Compendium of technologies for the treatment of reverse osmosis concentrate from inland desalination plants”, Chemical Papers, Springer (2023) DOI: https://doi.org/10.1007/s11696-023-02867-4.
  2. Bipin G.Vyas, P.K. Labhasetwar, A.Yadav, A.R.Paital,” A compendium of evaporation techniques for salt production from seawater and subsoil brine”, Chemical Papers, Springer (2022),  Impact Factor: 2.1
  3. Anshul Yadav, Raj Vardhan Patel, Bipin G. Vyas, Pawan Kumar Labhasetwar, Vinod Kumar Shahi, “Recovery of NaCl and CaSO4 from sub-soil brine using CNT@MOF5 incorporated poly (vinylidene fluoride-hexafluoropropylene) membranes via vacuum-assisted distillation”, Colloids and Surfaces A: Physicochemical and Engineering Aspects; vol 645, 20 July 2022, 128918, Impact Factor: 5.518
  4. Madhuri Narra, Kumud Macwan, Bipin Vyas, Manish R. Harijan,Disha Shah, Velmurugan Balasubramanian, Anil S. Prajapati, “A bio-refinery concept for the production of bio-methane and bio-ethanol from nitric acid pre-treated corncob and recovery of a high-value fuel from a waste stream”, Renewable energy, Volume 127, November 2018, Pages 1–10, ISSN: 0960-1481, Impact Factor: 8.634
  5. Madhuri Narra, Jyoti Divecha, Disha Shah, Velmurugan Balasubramanian, Bipin Vyas, Manisha Harijan, Kumud Macwan, “Cellulose production, simultaneous saccharification and fermentation in a single vessel: A new approach for the production of bio-ethanol from mild alkali pre-treated water hyacinth”, Journal of Environmental Chemical Engineering, volume 5, ISSN:2213-3437, 2017, pp. 2176-2181, Impact Factor: 7.968
  6. Samkit V Shah, Bipin G Vyas, Arun Bollavarapu and Shirish Patel, “Aerodynamic and Thermal Design of Centrifugal Compressor for Small Scale in Non-dimensional form”, International Journal of Mechanical and Production Engineering Research and Development(IJMPERD), vol 7, issue 2, pp. 81-92, ISSN: 2249-8001, NASS Rating : 3.11,Impact Factor: 6.87, March 2017
  7. Bipin G Vyas and Nirmal S Parmar, “Experimental analysis of Thermal Contact Resistance across different composite material pair using different interface material in presence of pressure conditions”, International Journal of  Current Research (IJCR), vol 8, issue 9, , pp 39322-39328, ISSN-0975 833X, Impact Factor: 6.226, September 2016
  8. Bipin G Vyas, Nilesh R Sheth, Mukesh P Keshwani and Nirmal S Parmar, “Experimental analysis of Thermal Contact Resistance across different composite material pair using different interface material in ambient condition”, International Journal of  Engineering Research & General Science (IJERGS), Nepal, vol 3, issue 6, (2015), pp 62-73, ISSN-2091 2730, Impact Factor: 3.843(SJIF), 5.18(ICV)
  9. Bipin G Vyas, Nilesh R Sheth, Mukesh P Keshwani and Nirmal S Parmar, “Review: Thermal Contact Resistance of metallic composite pair”, International Journal of Application or Innovation in Engineering & Management    (IJAIEM) vol 4, issue 2, pp 193-200, ISSN-2319 4847, Impact Factor: 4.01,February 2015

  1. A process for the preparation of common salt (NaCl) with reduced iodide and bromide content during solar salt harvesting (Application No:202311004830), (Alok Ranjan Paital, Arvind Kumar, Sumesh Chandra Upadhyay, Bipin Gordhanbhai Vyas, Rahul Jasvantrai Sanghavi, Sumit Balkrishna Kamble, Bhoomi Rameshkumar Andharia)
  2. Pharma-grade salt (NaCl) composition and its method of preparation thereof (Application No: 202111045223) s, (Alok Ranjan Paital, Arvind Kumar, Sumesh Chandra Upadhyay, Rahul Jasvantrai Sanghavi, Bipin Gordhanbhai Vyas, Hiren Dinkarray Raval)
  3. A Process for the recovery of high-purity salts from crudes containing sodium chloride and sodium sulfate (Application No: 202011009669), (Kumar Arvind, Upadhyay Sumesh Chandra, Sanghavi Rahul Jasvantrai, Hamidani Abdul Hamid, Vyas Bipin Gordhanbhai, Makwana Mahesh Harjibhai, Dobariya Rakesh Vinubhai, Bhatti Sameer Jayendrabhai, Gauswami Maulik Vinodpuri)

1) Bipin Vyas, Nirmal Parmar, Deepak Jani," Thermal Contact Resistance across different metallic composite pair", LAP Lambert Academic Publishing, Germany," ISBN 978-3-659-74205-7, 2017.

2) Deepak Jani, Bipin Vyas, Nirmal Parmar," Enhancement of heat transfer in Radiator by using different Nano fluids and varying mass flow rate", LAP Lambert Academic Publishing, Germany," ISBN 978-3-330-04515-6, 2017.


  • Enhancing solar evaporation of brine and increasing salt yield through mechanical means and non-conventional energy such as solar and wind energy.
  • Design, development, and deployment of energy-efficient devices for the salt industry.
  • Mechanical engineering and energy systems, focusing on energy-efficient machinery, solar-thermal systems, and renewable energy technologies.
  • Product and process development, field-scale experiments, and pilot plant activities.
  • Implementation and optimization of thermo-chemical processes on a field scale.
  • Operation and maintenance of salt handling equipment, along with salt quality improvement.
  • Mechanization of solar salt works and effective utilization of solar and wind energy in solar salt R&D projects.
  • Recovery of sodium sulfate from impure salt as a value-added product.
  • Project monitoring and management of field-scale R&D activities in the salt industry.

  • Mechanical Engineering (Thermal/Design/Heat & Mass Transfer/Fluid)
  • Energy Engineering (Renewable & Non-renewable Energy)
  • Salt Technology